KumuKutu is a One stop Shop for building and construction materials and services like Roofing, Pipes, Fittings, Sanitary Ware, Plumbing and Waterproofing and Paint, Kitchen & Bath Tubs & Bathroom Accessories, Trucks, Tiles, Water Tanks, Heaters & Pumps, Mirrors and Many More....
Oxford Station,6th Street, Industrial Area,
Kampala Uganda
Email: info@kumukutu.com
Phone:+256 779930701
Social: @kumukutu
İndoors and outdoors , horizontal and vertical surfaces , large-sized floor and wall tiles , granite, granite ceramic ,marble , clinker , furnishing of all kinds stone pavement , businesses are exposed to heavy pedestrian traffic,shopping centers,schools and hospitals like these spaces . Floor heating systems , Ceramic coating on the old granite and marble surfaces. Mosaic glass used for bond ing.
Flexible and strong adhesion. Water and frost resistant.Not affected by temperature changes. High stability , does not sag at vertical applications. From top-down floor provides.
It must be ensured that the application surface cured. should be cleaned from dust, oil, paint ,silicone ,curing agent and detergent such as anti-stick materials.it is necessary to wet and provided to remain moist . If the surface is too water-absorbent , it should be applied after taking a primer.
25 kg ” ALFILL SUPERFIX Granite Ceramic Tile Adhesive ‘’ joining into approximately 6-7 lt clear water, preferably mixed with the low speed mixer or trowel until homogenous. The prepared mortar is rest of 5-10 minutes for the maturation and re-mixing and used. In pot the mix should be consumed within 2 – 2,5 hours.
At firstly , pressed adhesive mortar strongly on the application surface , create contact layer and then selected the appropriate size of tile with a notched trowel the product dredged . Adhesive mortar should be provided to contact at least 80 % backside of the ceramic . According to used floor plates and the smoothness of the ground if necessary , be preferred ‘’ Double Sided Adhesive Method ‘’ , should be lead both backside of ceramic and on the ground and should be determine the plates , being perpendicular carding direction to each other . To provide good adhesion , with the help of a rubber hammer applying force , you should bond.
4 – 6 kg/m²
Avoid to apply in the temperatures under +5°C and above +35°C. Be careful the amount of the water involved to the mortar.Don’t add more water than necessary. Avoid application frozen ,the risk of freezing within 24 hours or direct sun and wind in open areas . Don’t addition definitely dust and water to the mortar which has expired .
25 kg kraft bag. Humid conditions and in unopened package with 10-fold stacked on a pallet can be stored for 6 months.
As all chemical products, during storage and handling it should be kept food products , the skin, eyes and mouth If swallowed accidentally , consult a doctor .In contact with skin , wash with plenty of water.
TS EN 12004 certified C2TE class
C: Cement based
2: High Performance
T: Thixothropic
E : Extended working time
Appearance | White or Grey colored toz |
Powder Density | 1,45 kg/lt |
Water Mixing Rate | 6-7 lt water / 25 kg powder |
Resting Time | 5-10 minutes |
Pot Life |
Approximately 2 – 2,5 hours
|
Open Time Tensile Adhesion | After Min. 25 minute
≥ 0,5N/mm² (EN 1346) |
Application Temperature | +5°C with +35°C between |
Adhesion | ≥ 1,0 N/mm² (28 days) (EN 1348) |
Sliding | ≤ 0,5 mm. (EN 1308) |
Walking Over Time | 24 hours |
Service Temperature | -30°C / +80°C |
UGX27,000–UGX40,000
Reviews
There are no reviews yet.