KumuKutu is a One stop Shop for building and construction materials and services like Roofing, Pipes, Fittings, Sanitary Ware, Plumbing and Waterproofing and Paint, Kitchen & Bath Tubs & Bathroom Accessories, Trucks, Tiles, Water Tanks, Heaters & Pumps, Mirrors and Many More....
Oxford Station,6th Street, Industrial Area,
Kampala Uganda
Email: info@kumukutu.com
Phone:+256 779930701
Social: @kumukutu
Cement and acyrlic based, very elastic,two componential a waterproofing material.Two component each other should be mixed to provide insulation.Positive water pressure.
Interior and exterior,horizontal and vertical applications.Water tanks,cisterns,swimming pools ( with a condition covered over).Basic insulation,retaining walls and basement insulation.Purpose of permeability against salty waters .The insulation of terrace roofs.Sewer pipes.Irrigation canals,sewerage wells,concrete pipes.On wet areas such as bath,kitchen,balcony. Such as spa and bath facilities.Flower insulation. For bonding coating materials ceramic and granite .
İt is applied easy with brush,roller,trowel or sprayer on horizontal and vertical surfaces, it is not affected from cold and hot air. Provides a waterproof seamless and jointless.Provides high-performance waterproofing.Elastic,nonshrinking and not crack. Although not permeability of the water ,it provides concrete to breath .Nontoxic ,it is ideal for water tanks.Due to the property of high adhesion and flexibility, it creates excellent insulation layer under ceramic .Protects the concrete surfaces from carbonization and chloride.
It must be ensured that the application surface cured. The application surface should be cleaned from dust, oil, paint ,silicone ,curing agent and detergent such the materials which prevent adhesion.Should be repaired weak parts of concrete ,removed not good plasters,turned the surface solid and smooth ,repaired static cracks in the building with ALFILL LATEXFIL plaster or ALFILL UNIVERSAL GROUT High Strength Shrinkage Repair and Anchoring Mortar.Dynamic (moving) cracks should be repaired with polyurethane sealant.if it is existent ,irons and wedges on the surface should be removed and the holes which coming water, should be filled such as the productions WATERSTOP. The application surface should be water-saturated and during the application it is provided to remain moist.
7 kg. B Component put a clear plastic rough. Slowly 20kg. Component A added to liquid and externally without extra water,preferably mixed with the low speed mixer until homogenous. After 3-5 resting time , mixed more 30 second then started to apply. In pot the mix should be consumed within 30 minutes and if this time is exceeded , the mortar should not be used.
ALFILL ALFIZOL Two Componential Waterproofing Material is applied at least two layers being perpendicular to each other on the surface. After first coat application at +20°C’ at least 5-6 hours , this time should not exceed 24 hours. Second coat should be applied before first coat does not fully dry.If the first coat dried , the surface should be moistened before second coat not applied.
After second coat application , the surface should be kept against sun and fast dry during 3 days. During application after first coat application,corners should be beveled and then second coat should be applied on the bevel. During application it is suggested to used file between two coats. After 3 days mechanical strength gains , after 7 days becomes watertight.After 14 days the last strength gains.it should be not applied open terraces and balconies in windy weather ,rain and extreme hot weather.
On each coat 1 kg/m2 is applied and 1 mm. Thick obtained. 2 coat is suggested to applied (2 kg/m2). On high-level protection consumption quantity can be increased untill 3 – 4 kg/m2’.
Avoid to apply in the temperatures under +5°C and above +35°C. Avoid application frozen ,the risk of freezing within 24 hours or direct sun and wind in open areas .Don’t add externally water to the mix. Everytime powder component ,should be added to liquid component.During the application,wet film thickness of 2 mm should not exceed for a single layer.
Component A : 20 kg. kraft bags . Component B : 7 kg plastic drums. At humid conditions with 10-fold stacked on a pallet can be stored for 12 months. Shake liquid component Before use and protect against frost.
Health and Safety :
As all chemical products, during storage and handling it should be kept food products , the skin, eyes and mouth If swallowed accidentally, consult a doctor .In contact with skin , wash with plenty of water. Stored away from children.
Appearance
|
A Component / Grey colored thin powder |
B Component / White colored liquid | |
Density
|
A Component / 1,40 kg/lt |
B Component / 1,03 kg/lt | |
Mixing Rate | 7 kg. liquid / 20 kg. powder |
Application Temperature | +5°C with 35°C between |
Flexibility |
Well
|
Pressured Water Resistance (DIN 1048) | 7 bar pozitive |
Capillary Water Absorption (TS 4045) | 0,018 kg/m2h1/2 |
Resting Time |
3-5 minute
|
Ready for Use | Mechanical Strength : 3 days |
Water Tightness : 7 days | |
Over Coating Time |
3 days
|
Service Temperature | -30°C / +80°C |
UGX22,000–UGX125,000
Reviews
There are no reviews yet.